DIY Instruction (English - Main)

:::::: Before applying :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

1. CutieLink wall decals can be applied on any smooth or rough surfaces, such as walls, glass, metal, wood, concrete...etc.
2. Make sure the wall surface is dry and free of dust and dirt! If an area is not clean enough, it decal may not stick properly and can peel off over time.
3. If your wall is freshly painted, allow at least two weeks for the paint to dry.
   

:::::: Remove concern :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

1. Let said after few months or year, you decided to remove the decals. You can gently peel it off by hand and don't worry the wall decal won't leave any glue residue.
2. If you're afraid of damaging the wall, you may use hair dryer (Heat position) to the decal. The decal will loosen and peel off within seconds.
   

:::::: General instructions ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::






1. White Backing

2. PVC Decal

3. Transfer Form/Tape






:::::: Step by step set-up :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

• Place your wall decal on flat table surface and rub firmly over the decal with squeegee (ATM card, soft sponge...etc.). This will strengthen the bond between the PVC decal and the transfer form/tape.

• Remove the white backing, making sure the PVC decal sticks properly to the transfer form/tape.

• Place and arrange the PVC decal on the desired surface or pattern. Press the top edge onto the surface and firmlt smooth the tape all the way down, alert that please avoiding bubbling and wrinkles.

• Finish the application by rubbing over the entire PVC decal with the squeegee in order to remove any air bubbles and activate the bond between the PVC graphic and the surface

• Remove the transfer form/tape from one corner & slowly roll it along the surface. If part of the wall decal sticks to the tape, simply roll the tape back, press down firmly & continue peeling.

• Remove any air bubbles by rubbing over the decal with a clean cloth (you can also poke bubbles with a fine needle and then smooth it out). On textured surfaces be sure to rub over the wall decal very firmly! This will ensure a proper bond between the wall decal and the surface, and will prevent it from peeling off over time.

Yeah! Success!
Hope your guys understand the guideline and enjoy stick.